#screenprinting #screenprint #screenprinter #decorate #logo #sling #textile #Bagbelt #labelprinting #clothtagprinting
Screen printing workers must adjust used
ink by following below steps:
a. To understand all kinds of
specification and performance of Ink, which makes it meet with production need.
b. Have a good command of basic knowledge
of color, be skillful during ink handling.
c. Analysis of color adjustment
and process skill of printing,Identify color of color sequence, In order to
avoid incorrect color sequence, both miscible and color change.
d. Pay more attention to Ink’s
color intensity when ink adjustment.
Adjusting by the original color as much as
possible if the required Ink’s intensity is larger. Otherwise it becomes grey
easily, then it cuts down the Ink’s original intensity.
Appropriately printing adjustment of Ink
Viscosity of factory ink usually is
slightly large, user should make comprehensive adjustments for ink viscosity,
surface tension,fluidity and drying speed according to the characteristics of
printing graphics, screen mesh, printing speed,workshop temperature, Substrate’s
surface tension and ceiling inking performance, Proper Solvent, diluent,
surface active and viscosity reducing agent are very good options in this case.
For example,you should get slightly smaller
fluidity and lower drying speed Ink when printing thin line or dots.you should use
larger viscosity and higher drying speed Ink when printing thick mesh. Fluidity
can be slightly larger and drying speed also can be higher when printing in
high speed. Drying speed should be lower and viscosity should be slightly larger
when the temperature in workshop is too high. Ink’s surface tension should be
smaller when Substrate’s surface tension is small. Ink’s fluidity and surface
tension should be larger, and drying speed should be lower when Substrate’s
surface ceiling ink performance is in very good condition.
没有评论:
发表评论